Z1005WS / Z1006WS
Z1005WS / Z1006WS Basic - Water Cooled Mitsui Seiki Air Compressors - Oil Flooded Puchong, Selangor, Kuala Lumpur (KL), Malaysia. Supplier, Suppliers, Supplies, Supply | ST Service & Trading Sdn Bhd / ST M&E Prudence Sdn Bhd
- Although the type is large, by adopting a dedicated compressor for each model, the compressing efficiency is drastically improved.
- The efficiency is enhanced by 20% with full load, by our comparison.
- The AUCS unloader is installed as a standard component in order to drastically reduce the use of electricity.
- Low noise and low vibration realized by the Z-screw balancing design.
- Optimum for the multiple control in large-scale factories.

Items Unit Details
Power frequency Hz 50 (ZU1005WS)
60 (ZU1006WS)
Power supply voltage V 380 / 400 / 415 (ZU1005WS)
380 / 400 / 440 (ZU1006WS)
Free air delivery (0.7MPa) m3/min 19.0 (ZU1005WS)
18.2 (ZU1006WS)
Delivered air pressure MPa 0.7
Pressure control method - Saving energy A.U.C.S & auto. Start & stop selection
Intake air pressure & temperature - Atmospheric pressure (2 to 40°C)
Discharge air temp. °C Less than cooling water intake temp., + 15°C
Main motor power kW 100
Motor type - Three-phase-squirrel-cage, 2P totally enclosed external fan
Starter - Automatic star-delta
Drive system - Direct coupled motor
Cooling system - Water cooled
Fan motor power kW 0.08 (ZU1005WS)
0.12 (ZU1006WS)
Lubrication water amount 130
Cooling water amount /min 130
Dryer Air dew point at outlet °C -
Refrigerant kW -
Discharge pipe diameter - 3flange
Dimension,L×W×H (body) mm -
Total mass(dry state) kg [ 2350 ]
Noise level [OP1.5m] dB·A 74
Dimension,L×W×H (body)[without dryer] mm 2860 × 1350 × 1750

Outside Appearance

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version